upr5e3, UPR10E3, upr15e3 2.5 amp hi g h efficienc y ultrafast rectifier description the microsemi upr5e3, UPR10E3, and upr15e3 powermite ? high efficiency rectifiers are rohs co mpliant and offers optimized forward voltage characteristics with reverse bl ocking capabilities up to 150 volts. they are ideal for surface mount applications that operate at high frequencies. in addition to its size advantages, powermite ? package features include a full metallic bottom that eliminates po ssibility of solder flux entrapment during assembly and a unique locking tab acts as an efficient heat path from die to mounting plane for external heat sinking with very low thermal resistance junction to case (bottom). its innovative design makes this device ideal for use with automatic insertion equipment. important: for the most current data, consult microsemi ?s website: http://www.microsemi.com absolute maximum ratings at 25o c (unless otherwise specified) rating symbol value unit working peak reverse voltage upr5e3 working peak reverse voltage UPR10E3 working peak reverse voltage upr15e3 v rwm v rwm v rwm 50 100 150 v v v average rectified out put current (at rated v rwm , t c =75oc) i o 2.5 a non-repetitive peak forward surge current 8.3ms single half-sine wave i fsm 25 a storage temperature t stg -55 to +150 oc junction temperature t j -55 to +150 oc do-216 see further details and dimensions on last page thermal characteristics (unless otherwise specified) thermal resistance junction-to-case (bottom) r jc 10 oc/ watt junction-to-ambient (1) r ja 240 oc/ watt (1) when mounted on fr-4 pc board using 1 oz copper with recommended minimum foot print key features ? low thermal resistance do-216 package for higher current operation ? utrasfast recovery time of 25 ns ? rohs compliant with e3 suffix part number ? efficient heat path with integral locking bottom metal tab ? low forward voltage ? full metallic bottom eliminates flux entrapment ? compatible with automatic insertion ? low profile-maximum height of 1mm ? options for screening in accordance with mil-prf-19500 for jan, jantx, and jantxv are available by adding mq, mx, or mv prefixes respectively to part numbers. for example, designate mxupr5e3 for a jantx (consult factory for tin-lead plating). ? optional 100% avionics screening available by adding ma prefix for 100% temperature cycle, thermal impedance and 24 hours htrb (consult factory for tin-lead plating) applicati ons/benefits ? switching and regulating power supplies. ? charge pump circuits ? reduces reverse recove ry loss with low i rm ? small 8.45 mm 2 foot print (see mounting pad details next page) mechanical & packaging ? case: void-free transfer molded thermosetting epoxy compound meeting ul94v-0 ? finish: annealed matte-tin plating over copper and readily solderable per mil- std-750 method 2026 (consult factory for tin-lead plating) ? polarity: see figure (left) ? marking: upr5e3: r05? UPR10E3: r10? upr15e3: r15? ? weight: 0.016 grams (approx.) ? package dimension on last page ? tape & reel option: 12 mm tape per standard eia-481-b, 3000 on 7 inch reel and 12,000 on 13? reel www. microsemi . com u u p p s s 1 1 4 4 0 0 e e 3 3 microsemi copyright ? 2007 6-26-2007 rev b page 1
upr5e3, UPR10E3, upr15e3 2.5 amp hi g h efficienc y ultrafast rectifier www. microsemi . com electrical parameters @ 25 c (unless otherwise specified) parameter symbol conditions min typ. max units forward voltage (note 1) i f = 2.0 amps 0.975 v forward voltage (note 1) i f = 2.0 amps, t j = 100c 0.895 v reverse current i r v r = v rwm , t j = 25 oc 2.0 a reverse current i r v r = v rwm , t j = 100 oc 50 a reverse recovery time t rr i f = 0.5 a; i r = 1.0 a: i rec = 0.25 a 25 ns note: 1 short duration test pulse used to minimize self ? heating effect. package & mounting pad dimensions do-216 package (all dimensions +/-.00 5 inches) mounting pad in inches u u p p s s 1 1 4 4 0 0 e e 3 3 microsemi copyright ? 2007 6-26-2007 rev b page 2
|
